Our Floor Screed Systems

Floor Screed Systems are an ideal choice to refurbish an existing concrete floor and provide a smooth finish and hard wearing surface to support a busy warehouse operation. CG Flooring Systems understand the importance of a good quality floor and provide a wide range of floor screed systems to meet any floor requirement.

There are two types of service that we offer, a floor screed system for a wearing screed, and also a system to level out floors to receive floor coverings. If you would like more information on our floor screed systems please see our information below, or contact us.

Wearing Screed (Finished Floor Surface)

Liquid Screed Fastfloor-IT is a Cementitious Pumpable Liquid Floor Screed system for the refurbishment of concrete industrial floors. This floor screed is mixed in a pump to a fluid consistency to allow the mixture to flow smoothly, accurately with an even level of surface regularity and flatness. The FASTFLOOR-IT is machine pumped and areas of 1000m2 can be covered in one day. Once laid, it will only take up to 2-3 hours for foot traffic and up to 24 hours for wheeled traffic, to reconvene operations in that area. Find out more.




Liquid Screed Reflective Floor - provides a long lasting aesthetic and extremely durable light reflecting surface. Once laid, it will only take up to 2-3 hours for foot traffic and up to 24 hours for wheeled traffic, to reconvene operations in that area. Find out more.




Resin Screed System provides surface finishes using thinner coating systems through to thicker floor screed systems, generally using epoxy or polyurethane based resin systems. These floor screed systems can be tailored for heavy duty traffic areas and also to suit available budget. They generally provide a level of protection against most common chemicals. Find out more.

Non-Wearing Screed (To Receive Floor Coverings)

Sand Cement Screed systems are generally the most traditional. This is mainly due to its suitability to receive almost any type of floor covering. It's a semi-dry screed system which makes it the best choice for floors that are required to be laid to falls. It can be applied to ground floor slabs, suspended floors and on floating construction over insulation e.g. for underfloor heating systems. Find out more.



Floor Heating Screed are flowable in nature and are designed to provide the best solution for your underfloor heating system. In addition, they have significant advantages over the more traditional sand and cement floor screed systems, e.g. a greater area can be covered in one day. Find out more.